Injector Unlocker & Spark Plugs Injec aid

Areas of application

Effective solution for blocked spark plugs and injectors. To remove injectors and spark plugs jammed by rust and carbon. The special formula of Deblocker Injectors & Candles Injec aid has active ingredients that quickly penetrate into the deepest layers of rust and coal due to microcracks and dissolve rust. Allows quick removal without damage. Unlocking Injectors & Spark Plugs Injec aid also incorporates PTFE particles to improve sliding properties and facilitate dismantling. Eliminates water and prevents new rust, free of acids and silicones.

Advantages

Spark plug and injector solvent ensures easy removal of injectors. Unblocker Injectors & Candles Injec aid achieves excellent results: its high penetration power ensures that the product acts directly on the injector seat. The action of the special formula allows rust and dirt to be removed without damaging the injector. PTFE particles with excellent lubricating properties make it easy to remove the injector from the cylinder head. To facilitate the handling and application of the product in the injector, Desblockador Injectores & Candles Injec aid is supplied with a spray tube.

Characteristics

Moisture is often the cause of rust that forms on the injector seat. When it rains, water runs down the windshield, for example, and concentrates near the cylinder head, it's only a matter of time before it enters the gasket, thus causing corrosion in the injector bank. Corroded spark plugs and injectors can often only be disassembled with a special tool, which can sometimes damage them causing time-consuming damage that is difficult to repair.

Instructions for use

Shake before using Unblocker Injectors & Candles Injec aid. Remove larger debris. Spray the product directly onto the base of the elements to be cleaned/removed and leave to act for 30-45 minutes. Remove the debris released by the product with the help of compressed air. Then apply the product abundantly and directly by spraying on the seat of the cylinder head. Let the product act for 5 minutes. In case of extreme oxidation, leave the product to act overnight..